Dark granite countertops – Installing granite tile countertops in the kitchen is one of the safest ways to add value to your home while updating your decor. Granite typically produces a great return on your investment, and buying tiles instead of a granite slab can potentially save thousands of dollars. The average do-it-yourself can install granite tile countertops in the kitchen in the course of an afternoon.
Install dark granite countertops, Measure, cut with a circular saw, and install a plywood substrate layer of wood to start. Screw cement board 1/2 inches to its plywood, and countersink bolts just below the surface of the cement board. Cut 2 inches strips cement board, and screw those edges so they are flush with the top of the backer board. Use a Sewall to cut the area where the kitchen sink will be installed later. Cut careful not to hit any cabinets below the surface of the substrate plywood.
Spread your glue cement mixed with a notched trowel to an area at the top of the backer board closest to the edge. Place full tiles on the outer edges, the tiles butting against each other. Cantilever this row of tiles to compensate dark granite countertops tile strips you can add to the last edges. Use a tile saw to cut the tiles that will be placed along the wall, around the sink and cut 2 – inch strips along the edges. Apply tile adhesive on one side of the backer board and the position of edging tiles 2 inches. Allow the mortar for a few hours, and then add the grout between the tile joints with a rubber mallet.